VITA In-Ceram® Professionals

Milling

VITA In-Ceram^® milling technique

As for the three VITA In-Ceram slipping variants, the fabrication process for the milling variants of VITA In-Ceram SPINELL, ZIRCONIA and ALUMINA in the Sirona inLab is identical.

• Fix working model on the support
• Scan model
• Construct crown cap or bridge framework (reduced tooth shape) at the PC (CAD)
• Insert VITA In-Ceram block into milling unit
• Form milling in the inLab (CAM)
• Fitting of the framework
• Cleaning firing in the VITA VACUMAT
• Apply VITA In-Ceram GLASS POWDER
• Glass infiltration firing: SPINELL in the VITA VACUMAT, ALUMINA and ZIRCONIA either in the VITA INCERAMAT or in a traditional ceramic furnace, e.g. VITA VACUMAT
• Remove excess glass
• Glass control firing in the VITA VACUMAT
• Veneer finished framework with veneering ceramic VITA VM 7

Manufacturing process of a VITA In-Ceram YZ or VITA In-Ceram AL restoration using the FrameWork or WaxUp software:

• Produce master model
• Produce scan model or alternatively wax model
• Fix scan model on scan holder or alternatively fix wax model on special WaxUp holder
• Scan model
• Construct framework (CAD, FrameWork software only)
• Insert VITA In-Ceram YZ or AL block and scan bar code
• Form milling (CAM)
• Check the fit of the framework
• Remove dust from framework
• Cleaning firing and coloring (optional)
• Sintering
• Fitting of the framework
• Veneering (VITA In-Ceram YZ with VITA VM 9, VITA In-Ceram AL with VITA VM 7)

Assortments

Here you will find further information on VITA In-Ceram assortments for the milling technique.

Sirona inLab System:

• VITA In-Ceram SPINELL for inLab
• VITA In-Ceram ALUMINA for inLab
• VITA In-Ceram ZIRCONIA for inLab
• VITA In-Ceram AL for inLab
• VITA In-Ceram YZ for inLab

DCS Precident System:

• VITA In-Ceram ALUMINA for DCS
• VITA In-Ceram ZIRCONIA for DCS

Mikrona CELAY system:

• VITA In-Ceram SPINELL for CELAY
• VITA In-Ceram ALUMINA for CELAY
• VITA In-Ceram ZIRCONIA for CELAY

Working instructions

• VITA In-Ceram SPINELL for inLab, VITA In-Ceram ALUMINA for inLab und VITA In-Ceram ZIRCONIA for inLab.
• VITA In-Ceram AL im forLab.
• VITA In-Ceram YZ for inLab.

• You can also order the instructions in printed form.

• Your Downloads
• About this function